Help
These are the messages Banking shows, grouped by where you see them, with an explanation and what to do. Where a message contains a variable value, for example a claim or bank account number, it shows "…". Errors from the bank usually appear in a field on the line, for example Communication Error Desc. on a claim or Error in the payment journal. Problems that come without a message are at the bottom of the page.
Some messages aren't translated and appear in English in the Icelandic interface too. This is noted next to them.
Claims: create and send
Messages that can appear when claims are created in a claim batch and sent to the bank with Perform Operations. See Create claims and send them to the bank.
| Message | Explanation | What to do |
|---|---|---|
| There are unapplied credit memo entries behind the claims. Would you like to open Customer Ledger Entries and apply them before you create the claims? | A question, not an error. A customer has a credit memo that isn't applied to an invoice, so the claim would be higher than what they owe. Appears when Check unapplied Credit Memos is selected in Create Claims. | Choose Yes, apply the credit memo to the invoice and then choose Create Claims again. |
| Customer SSN cannot be validated: … | The national ID on the claim isn't valid. It's copied from the customer when the claim is created. No claim in the batch goes to the bank until this is fixed. | Correct the national ID on the customer card, delete the claim from the batch, choose Create Claims and then Perform Operations. |
| Due date 2 is before Due date on claim No. … | The claim's Due Date 2 (final due date) is before its Due Date. No claim in the batch goes to the bank until this is fixed. | Open the claim, correct Due Date 2 and choose Perform Operations again. See Claim dates. |
| Claimant SSN is required in Creation Data or on Collector | The bank account that is the batch's Collector doesn't have your company's 10-digit national ID. | Enter the company's national ID on the bank account. See Bank account. |
| Claim Bank Branch No. … should have length 4 | The collector bank account's branch number isn't 4 digits. | Correct the branch number on the bank account card. |
| Unable to find Web Service … for bank account … | The bank account isn't connected to a bank service, so the system doesn't know how to talk to the bank. | Select a bank service on the bank account. See Bank services. Contact Rue de Net if that doesn't work. |
| Error from bank, see … | Appears in Communication Error Desc. on a claim. The bank didn't answer or the answer couldn't be read. | Choose Perform Operations again. If the error persists, contact Rue de Net and give the claim number. |
| First operation on every claim must be Create, claim no. … | You tried to send another operation on a claim that hasn't been created in the bank. | Change the claim directly, or send the creation first with Perform Operations. |
| The batch will be split before claims are created. Use Ctrl+Shift+S to split the batch now. | The batch holds more claims than Claim Batch Max Size allows. | Choose Split batch or let the system split it. |
| Customer Setup … not found for customer … | The customer setup code on the customer doesn't exist. | Create the setup or choose another code on the customer. See Customer settings. |
| Payment Distribution Setup is missing for Payment Term … | The payment terms on the sales order don't have No. of Due Dates and Interval between Due Dates. | Fill in the fields or choose other payment terms. See Distribute sales order payments. |
Claims: change, distribute and cancel
Messages that can appear when a claim that is already in the bank is changed, distributed or cancelled. See Update a claim, Distribute a claim over more due dates and Cancel a claim.
| Message | Explanation | What to do |
|---|---|---|
| Due Date can not be changed when claim is sent to bank. Please cancel the claim first. | The due date is fixed once the claim has been sent. Due Date 2 and Cancellation Date can be updated. | Change the final due date, or cancel the claim and create a new one with the right due date. |
| First operation the claim has to be Create | The claim hasn't been sent to the bank, so there is nothing to update or cancel. | Send the claim with Perform Operations, or delete it from the batch if it shouldn't go. |
| It's not possible to change claim that has not been sent to bank | You chose an update or cancellation in the claim worksheet for a claim the bank hasn't received. | Send the creation first, or delete the claim from the batch. |
| It's not possible to choose Create operation | Creation is only chosen when a claim is created. | Choose update or cancel. |
| Number of claims must be 2 or more | You entered fewer than two claims when distributing a claim. | Enter 2 or more. |
| Amount must equal remaining amount if claim is to be distributed. | The claim has been partly paid. | A partly paid claim can't be distributed. |
| No claim lines found for claim …. Nothing to split. | The claim isn't linked to any customer ledger entry. | There is nothing to split. Check the claim on the claim card. |
| This Claim has been sent to the bank and should not be deleted unless it is necessery. Do you want to delete? | A question. If you delete a claim in Business Central it still exists in the bank and the customer keeps seeing it. | Choose No and cancel the claim instead, so it's removed from the bank too. |
| Claim … can not be deleted | You answered No to the question above and the claim wasn't deleted. | Nothing. Cancel the claim if it shouldn't stand. |
| Batch is closed. Open it to change Partial Payment Allowed for all claims in the batch. | You changed Partial Payment Allowed on a batch that is closed. | Open the batch, change the setting and choose Perform Operations to send the change. See Partial payments of claims. |
| Nothing to update. | All claims in the batch already have this partial payment setting. | Nothing. |
Claim payments
See Fetch and post claim payments.
| Message | Explanation | What to do |
|---|---|---|
| Claim Payment … was made before the posting date of the document. Do you want to skip the current line? | The payment is older than the invoice it applies to. | Choose Yes to skip the line and apply it manually. |
| Skipped entries for blocked customer: … | The customer is blocked and the payment was not added to the cash receipt journal. | Unblock the customer, or turn on Allow Blocked Customer Posting From Bank. |
Outgoing payments
See Pay vendors by wire transfer.
| Message | Explanation | What to do |
|---|---|---|
| Posting date must be today and not … | Payments are sent with today's posting date. | Change the date on the lines. |
| Doc No. … for date … is not on zero | The vendor line and bank account line of a document don't balance. | Fix the amount or choose Insert Balance Line. |
| Bank Branch No-Transit No.-Bank Account No.; … must have length 12 | The vendor's bank account isn't entered correctly. | Correct the bank account on the vendor. |
| Posting is not possible because … lines have errors! or … lines have not been sent to bank! | Lines are Error or haven't been sent. | Fix the lines that are Error or send them. The bank's error is in the Error field. |
| … lines have not been confirmed from bank | The bank hasn't confirmed all the payments. | Choose Check Status and post again. |
| Journal has not been sent to bank | You chose Check Status before the journal was sent. | Send the journal first. |
| If payment is in a foreign currency nothing in the journal can be ISK | The journal mixes foreign and domestic payments. | Move the domestic payments to another batch. See Foreign payments. |
| The journal must be in … and not … | The first line in the journal is in a different currency from another line. | Split the payments into two batches. |
| Cannot wire transfer money to the same bank account you pay from | You selected the same bank account the journal pays from. | Select another account. See Create a wire transfer. |
| "Charge Amount Bal. Account" and "Interest Bal. Account" need to be filled out | One of the accounts is missing in the payment setup. | Fill in the accounts. See Set up outgoing payments. |
| It is only allowed to pay claims for this vendor | The vendor is set to Only pay claims and the transfer line gets the status Error. | Delete the line and fetch the claim. See Pay claims from online banking. |
| Bank Account does not exist | The bank couldn't find the account for this national ID. | Check the bank branch number, ledger, account number and national ID, and get the correct details from the receiver. See Confirm a bank account. |
| Some lines contain an invalid bank account. Count: … | The journal has lines where the bank account wasn't confirmed. | Fix the lines that are Error and check again. |
| Payment Information is only for Bank Account lines | You selected the vendor line. | Select the bank account line. See Payment information. |
| SSN of claimant not found. or Claimant SSN wrong or bank account not found. | The national ID or bank account is missing on the vendor. | Register the national ID and the bank account on the vendor and try again. |
Reconciliation
See Reconcile a bank account and Match entries by hand.
| Message | Explanation | What to do |
|---|---|---|
| Reconcile setup not found for bank account … | The field RdN Reconciliation Setup is empty on the bank account. | Choose Open Bank Account Settings and fill it in. See Set up reconciliation. |
| Amounts do not match! | The sum of the marked entries isn't the same on both sides. | Check Total Sum and mark a missing entry or unmark a wrong one. |
| Choose entries to reconcile | No entry is marked. | Mark the entries to match. |
| Choose ReconID to recall | The marked entry hasn't been matched. | Choose Filter to Matched first. |
| There are no entries to move | No entry was marked, or all entries are already matched. | Mark the entries to move to a payment journal. See Move bank entries to a payment journal. |
| You must select From and To dates | A date is missing when matching opening entries. | Fill in both dates. See Match opening entries. |
| You must select a bank account | The bank account is missing when matching opening entries. | Fill in Bank Account. |
| Choose entries to reconcile (opening entries) | Marked is turned on but no entry is marked. | Mark the entries or turn off Marked. |
| Currency … not found for Purchase Invoice … | The posted purchase invoice isn't in a foreign currency or can't be found. A currency difference is only posted when the payment's document is a posted purchase invoice. | Choose Open Posted Purchase Invoice to look at it. See Post a currency difference. |
Credit cards
See Create credit cards and Create purchase invoices from card transactions.
| Message | Explanation | What to do |
|---|---|---|
| Manual insertion is not allowed. Please use the "Import Credit Cards" action to fetch credit cards from your bank. | Cards are only created by fetching them from the bank. | Choose Import Credit Cards. |
| A line was skipped without a credit card mapping or with no account on the mapping | No mapping exists for the merchant, or the mapping has no account. The lines are still marked. | Fix the mapping and run the action again. |
| Wrong account type | Only a vendor mapping can create a purchase invoice, and only a G/L account or bank account mapping can create a general journal line. | Select the switch that matches the Account Type. |
| A line was skipped without a Related-Party Name | The bank didn't send a merchant with the transaction. | Create the invoice by hand. |
| A Purchase Invoice … for vendor … with amount … on … already exists. Do you want to open it instead of creating a new one? | An unposted invoice for the same vendor with a similar amount and date was found. A posted invoice can match too. | Open it and confirm that it belongs to the transaction. If it doesn't, decline the prompt and create a new invoice. |
| A Posted Purchase Invoice … for vendor … with amount … on … already exists. Do you want to open it instead of creating a new one? | A matching posted invoice was found. | Open it and confirm that it belongs to the transaction before creating another. |
| Enter at least one character before the wildcard. | The card acceptor ID on a mapping is just *. | Enter at least one character before *. |
Exchange rates
See Fetch exchange rates and Fetch exchange rates automatically.
| Message | Explanation | What to do |
|---|---|---|
| Select Bank Account | You didn't select a bank account in RdN Get Currency Exchange Rate. | Select an account in No.. |
| Error occurred while calling Central Bank Web Service | The Central Bank's web service didn't respond. | Try again later. |
| No Parameter String was found… | The job queue entry's parameter string is empty. | Enter a parameter string. |
| The parameter "Seðlabanki;Sala" is obsolete… or The parameter "Seðlabanki;Kaup" is obsolete… | The Central Bank only publishes the mid rate. | Use Seðlabanki;Mið. |
| Empty value error. or Could not get value from second position. | The parameter string is misspelled. | Check that a semicolon separates the parts and that there are no spaces. |
Connections, bank users and setup
See Fjárhagstengingar and Bank users.
| Message | Explanation | What to do |
|---|---|---|
| Fjarhagstengingar URL must end with "/" | The URL is missing a / at the end. | Add / to the end of the URL. |
| Token is not valid | The user's bank token has expired or is invalid. | Choose Update FTH User Token and enter your user name and password again. |
| … does not have permission to register … as a user | You tried to register another user with the bank without administrator permission. | Let the user register themselves on the Your RdN Bank Users page, or get administrator permission. |
| ✖ No Bank Account has finished setup | In the assisted setup summary. No bank account is set up well enough to talk to the bank. | Finish the bank account. See Bank account. |
BankDocs
BankDocs is an optional add-on to Banking. See Send invoices to the bank and Check and resend documents.
| Message | Explanation | What to do |
|---|---|---|
| There were no claim invoices sent successfully. or There were no payment slips sent successfully. | No document went to the bank. | Choose Go to log to see the error on each document. |
| SSN "…" on bank account … is invalid. | SSN on the collector's bank account isn't 10 digits. | Correct the national ID on the bank account. |
| Customer ID "…" on Claim … is invalid. | The payer's national ID on the claim isn't 10 digits. | Correct the national ID on the customer. |
| Customer … has the field "Skip Claim Invoice to Bank" set to Yes. or … "Skip Claim PaySlip to Bank" set to Yes. | The customer shouldn't get invoices or payment slips in online banking. | Clear the field on the customer card if that's wrong. |
| The bank account of the claim batch might have an invalid bank service setup. | The collector's bank service isn't set up correctly for BankDocs. | Check the collector's bank service. See Set up BankDocs. |
| No claims found for batch …. | The batch is empty. | Choose a batch with claims. |
| There are no log entries within the filter. | The attempt has no failed documents, or you didn't select any lines. | Select the lines to resend. |
Problems without a message
| Problem | Explanation | What to do |
|---|---|---|
| No claim was created when claims were created. | The entry's remaining amount is below Minum Claim Amount in the customer's setup, or the general Minimum Claim Amount when no customer setup is assigned, or a claim already exists for the entry. | Check the remaining amount and whether a claim already exists. See Create claims and send them to the bank. |
| No claim was created automatically on posting. | The invoice's payment method isn't in Payment Method 1 to Payment Method 7, or its remaining amount is below Minum Claim Amount in the customer's setup, or the general Minimum Claim Amount when no customer setup is assigned. | See Create claims automatically on posting. |
| A claim has an error after Perform Operations. | The bank rejected the operation. | Open the claim card, read Communication Error Desc., fix the cause and choose Perform Operations again. |
| The claim status doesn't change even though the customer has paid. | The claim payments haven't been fetched and posted. | Fetch and post the claim payments, then choose Get Claim Status. See Follow up on claims. |
| A payment made today doesn't appear. | The bank confirms payments at midnight. | Fetch the payments again after 01:00. |
| A job queue entry that fetches claim payments or exchange rates is in error. | The bank user of the person who runs the entry isn't registered or the bank token has expired, or the journal is missing in the claim setup. | Open the entry and read the error. See Fetch claim payments automatically. |
| A bank entry isn't matched automatically although the amount is right. | The dates are too far apart, or more than one entry is possible and Allow Unsafe Suggestions is turned off. | Match it by hand. See Match entries by hand. |
| No entries come from the bank during reconciliation. | The period is wrong, or the bank user doesn't have access to the account. | Check the period and the user's access at the bank. |
| The bank rejected a foreign payment. | Most often the SWIFT code or IBAN is missing on the vendor bank account. | Read the Error field on the line and fix the bank account. |
| A document is Success in the BankDocs log but doesn't appear in online banking. | RB can reject documents after the bank has accepted them. | Contact the bank. |